Airframe & System Upgrades

AS365
Usage Monitoring System (UMS) step 1
SB number : AS365-45-60-03 (R00)
Applicable to version(s) : N3
The “UMS (Usage Monitoring System)” allows recording different aircraft parameters during flight, and thus providing a picture of the aircraft usage.
Installation of a "Light HUMS" recording system. This system, combined with the SSCVFDR, acts as a flight recorder and safety and maintenance monitoring system.
This installation consists in updating the MFDAU by return shipment of equipment or as per Maintenance Manual (MET), as required, adapting the console, if there is no location available for the DTU, replacing the CVFDR control panel with the HMI control panel, installing wiring between the DTU on the console and the SSCVFDR, in the tail boom and installing a DTU data recorder and its PCMCIA card.
Download as .pdf

+1.5 kg

-3.6 m.kg

1.5 day(s)

Benefits

  • Recover recorded flight data (flight time, operating time, engine cycles, landing, limits exceeded, etc.).
  • Print out flight reports; flight monitoring and analysis may be performed automatically.

PRE-POST REQUISITE / EFFECTIVITY

Helicopters on which the "Light HUMS" (HUMS/Usage or UMS step 1) was not installed, pre-MOD 0731B63 (TARGA DTU equipment evolution (HUMS UMS)) on which the Removable Part (RP) of the SSCVFDR without UMS was installed (OP31B50 / OP31B56).

INSTALLATION TIME
QUALIFICATION INSTALLATION DURATION
Airframe, Systems 6 Hour(s)
Avionic, Electrical 4 Hour(s)
Click here to
identify your kit(s)
Technical filtering assistant
CONFIGURATION MATRIX
CONFIGURATION PRE-POST MOD STATUS  
1 MFDAU P/N 360-00700-100 or 360-00700-101 installed, Location available on the console This is my configuration
2 MFDAU P/N 360-00700-100 or 360-00700-101 installed This is my configuration

Looking for more information about this product? Email sales-promotion@airbus.com